Error: unrecognized or incomplete command line. USAGE: ipconfig [/allcompartments] [/? | /all | /renew [adapter] | /release [adapter] | /renew6 [adapter] | /release6 [adapter] | /flushdns | /displaydns | /registerdns | /showclassid adapter | /setclassid adapter [classid] | /showclassid6 adapter | /setclassid6 adapter [classid] ] where adapter Connection name (wildcard characters * and ? allowed, see examples) Options: /? Display this help message /all Display full configuration information. /release Release the IPv4 address for the specified adapter. /release6 Release the IPv6 address for the specified adapter. /renew Renew the IPv4 address for the specified adapter. /renew6 Renew the IPv6 address for the specified adapter. /flushdns Purges the DNS Resolver cache. /registerdns Refreshes all DHCP leases and re-registers DNS names /displaydns Display the contents of the DNS Resolver Cache. /showclassid Displays all the dhcp class IDs allowed for adapter. /setclassid Modifies the dhcp class id. /showclassid6 Displays all the IPv6 DHCP class IDs allowed for adapter. /setclassid6 Modifies the IPv6 DHCP class id. The default is to display only the IP address, subnet mask and default gateway for each adapter bound to TCP/IP. For Release and Renew, if no adapter name is specified, then the IP address leases for all adapters bound to TCP/IP will be released or renewed. For Setclassid and Setclassid6, if no ClassId is specified, then the ClassId is removed. Examples: > ipconfig ... Show information > ipconfig /all ... Show detailed information > ipconfig /renew ... renew all adapters > ipconfig /renew EL* ... renew any connection that has its name starting with EL > ipconfig /release *Con* ... release all matching connections, eg. "Wired Ethernet Connection 1" or "Wired Ethernet Connection 2" > ipconfig /allcompartments ... Show information about all compartments > ipconfig /allcompartments /all ... Show detailed information about all compartments =========================================================================== Interface List 2...08 f1 ea 16 84 1c ......Broadcom NetXtreme Gigabit Ethernet 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.10.28.254 10.10.28.1 281 10.10.28.0 255.255.255.0 On-link 10.10.28.1 281 10.10.28.1 255.255.255.255 On-link 10.10.28.1 281 10.10.28.255 255.255.255.255 On-link 10.10.28.1 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 331 127.0.0.1 255.255.255.255 On-link 127.0.0.1 331 127.255.255.255 255.255.255.255 On-link 127.0.0.1 331 224.0.0.0 240.0.0.0 On-link 127.0.0.1 331 224.0.0.0 240.0.0.0 On-link 10.10.28.1 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 331 255.255.255.255 255.255.255.255 On-link 10.10.28.1 281 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.10.28.254 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 331 ::1/128 On-link 1 331 ff00::/8 On-link =========================================================================== Persistent Routes: None